- Other Garment Accessories[4]
- Zippers[3]
- Mechanical Accessory & Parts Processing[3]
- Metal Processing Service[2]
- Other Apparel Machinery[4]
- Sewing Machines[5]
- Zipper Making Machines[10]
- Apparel Machinery Parts[2]
- Belt Making Machinery[1]
- Drying Equipment[2]
- Oil Pressers[1]
- Laser Equipment[1]
- Machinery Parts Processing Services[1]
- Other Metal Processing Machinery[2]
- Packaging Machinery[5]
- Paper Processing Machinery[1]
- Paper Product Making Machinery[2]
- Plastic Extruders[1]
- Plastic Injection Machinery[10]
- Plastic Product Making Machinery[2]
- Printing Machinery[2]
- Rubber Processing Machinery[2]
- Other Shoemaking Machinery[3]
- Knitting Machinery[2]
- Other Textile Machinery[4]
- Textile Finishing Machinery[1]
- Textile Raw Materials Processing Machinery[1]
- Weaving Machinery[3]
- Textile Machinery Parts[4]
- Testing Equipment[1]
- Lawn Mower[1]
- Contact Person : Mr. Peng Ailion
- Company Name : Shenzhen Huakaiyiyang Machinery Co., Ltd.
- Tel : 86-0755-84117984
- Fax : 86-0755-84129403
- Address : Guangdong,Shenzhen City,No.3,2nd Jinsha Industrial Zone,Kengzi Town,Longgang District,Shenzhen City,Guangdong,China
- Country/Region : China
- Zip : 518000
Related Product Searches:Two color Injection Moulding,High Quality,plastic injection mould, moulds for injection,HKT1680
Technical parameter | CMQ168 for wide and flat mould | ||||||
Injection device | Injection1 | Injection2 | |||||
A | B | C | A | B | C | ||
Screw Diameter | mm | 28 | 32 | 36 | 28 | 32 | 36 |
Screw LD ratio | L/D | 24 | 21 | 18.7 | 24 | 21 | 18.7 |
Theoretical capacity | cm3 | 96 | 125 | 156 | 96 | 125 | 156 |
Injection weight | g | 87 | 114 | 145 | 87 | 114 | 145 |
Injection Pressure | MPa | 235 | 180 | 142 | 235 | 180 | 142 |
Screw rotational speed | Rpm | 0~220 | 0~220 | ||||
Clamping device | |||||||
Clamping force | kN | 1680 | |||||
Moving mould distance | mm | 345 | |||||
Tie bar spacing | mm | 700×420 | |||||
Rotary diameter | mm | 760 | |||||
Max.mould thickness | mm | 430 | |||||
Min. mould thickness | mm | 150 | |||||
Ejector stroke | mm | 100 | |||||
Ejector force | kN | 33 | |||||
Ejector bar amount | PC | 2 | |||||
Mould fixing center to center | mm | 420 | |||||
Others | |||||||
Max.pump pressure | MPa | 16 | |||||
Pump motor power | kW | 18.5 | |||||
Heating power | kW | 5.9 | |||||
External dimention | mm3 | 4970×1700×1873 | |||||
Weight | Kg | 8000 | |||||
Material cylinder capacity | L | 25 | |||||
Oil tank capacity | L | 305 |
The clamping Unit of Two-Component (Rotary Table) Injection Molding Machinetwo sets of hydraulic independent ejector system to expand scope of application and flexibility. There is a 180°to-and fro rotary drive on the moving platen. It can place two moulds to produce products of two different colors. Rotate the cooling water connecting device of platen mould. The needed cooling water can be conveniently connected through rotating axis to avoid winding and interference of cooling water pipe. Both two ejection units adopt new-type single cylinder ejection construction. Ejection and charging operate independently, so several compound ejection can work together. Fine hydraulic circuit design can reduce the pressure of oil pipes, so the hydraulic control is more accurate. Two independent proportional pressure & flow control circuits are used to control and drive two sets of injection devices and two sets of hydraulic ejector systems. The product is molded and formed in one time, therefore, the degree of contraction is reduced to the minimum and the appearance quality is much improved.
Two color Injection Moulding